Overview
The RODE VideoMic GO II-H is a lightweight camera-mount shotgun microphone with an electret condenser element and two outputs: an analogue 3.5mm TRS output for cameras and a digital USB-C output for computers, phones and tablets. It is aimed at content creators, from vloggers and podcasters to livestreamers and run-and-gun interviews.
It has no switches or controls and needs no battery, running on plug-in power from the camera's TRS connection or on USB bus power. A foam windscreen reduces wind noise from light breezes, fans, heaters and air conditioners, and the RODE WS12 furry windshield is available separately for stronger wind outdoors. A Helix isolation shockmount and an SC14 3.5mm TRS cable are also included.
Sound Pickup
The VideoMic GO II-H uses the same annular line tube design as the RODE VideoMic NTG and NTG5, which gives it a full-bodied, directional sound. Its supercardioid pattern picks up what is in front of the mic and reduces sound from the sides and rear, while still capturing more distant sources with presence and clarity.
Connections
- Camera use: the Helix isolation shockmount holds the mic in the camera's cold shoe and absorbs bumps and shakes, and the SC14 cable connects to the 3.5mm TRS input; set the level with the camera's own gain control
- USB use: the USB-C output works as a fully featured USB microphone with Windows, macOS, iOS and Android devices, and the 3.5mm output then carries headphone monitoring
- A USB cable is not included: use a RODE SC16 or SC17 (USB-C to USB-C) or SC18 (USB-C to USB-A), or the SC15 or SC19 for an iOS device
- An integrated 24-bit, 48kHz analogue-to-digital converter provides uncompressed audio over USB
RODE Apps
- RODE Connect: record with up to four of these microphones on one computer, with control over input level and audio processing
- RODE Reporter: set the input gain, high-pass filter, high-frequency boost and pad, and record on a mobile device
- RODE Central: access the same settings plus direct monitoring control and firmware updates
Microphone
| Type | Shotgun |
| Pickup Pattern | Supercardioid |
| Capsule | Electret Condenser |
| Sound Field | Mono |
| Orientation | End Address |
Audio Performance
| Frequency Range | 20 Hz to 20 kHz |
| Max Sound Level | 110 dB |
| Noise Floor | 15 dB (A-Weighted) |
| Dynamic Range | 95 dB (A-Weighted) |
Connections
| Analogue Out | 3.5 mm TRS (on Mic) 3.5 mm TRS (on Included Cable) |
| Digital Out | USB-C Female |
Digital
| Bit Depth | 24-Bit |
| Sampling Rate | 48 kHz |
| OS Compatibility | Windows 10 macOS 10.15 |
| Mobile App | Android & iOS |
Power
| Power Source | Plug-In Power & USB Power |
| Supply Voltage | 2 to 5 V (Bias/Plug-In Power) 5 V (USB Bus Power) |
Physical
| Mounting Thread | 3/8"-16 Thread |
| Colour | Black |
| Dimensions | Microphone 21.6 x 120 mm (Diameter x Length) With Mount & Windscreen 120 x 50.3 x 52.4 mm (L x W x H) |
| Weight | 33 g (Microphone) 60 g (with Mount, with Windscreen) |
What's Included
- RODE VideoMic GO II-H Analogue & USB Camera-Mount Shotgun Microphone
- Helix Isolation Shockmount
- Foam Windscreen
- SC14 3.5mm TRS to 3.5mm TRS Cable (Right-Angle)
- Barcode: 75514
- UPC Barcode: 698813012985
- Supplier Code: RODVMGOIIH